فیلترها/جستجو در نتایج    

فیلترها

سال

بانک‌ها



گروه تخصصی











متن کامل


نویسندگان: 

FOROUGHI ASL A. | NADERI ZARNAGHI V.

اطلاعات دوره: 
  • سال: 

    2013
  • دوره: 

    42
  • شماره: 

    4 (69)
  • صفحات: 

    15-24
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    412
  • دانلود: 

    0
چکیده: 

Economic advantages and rapid construction of roller compacted concrete (RCC) has been considered by researchers and stakeholders of hydraulic structures with the increasing use of roller compacted concrete in dams industry and highway projects. The purpose of this experimental research is to investigate the influence of polypropylene fibers with different size and amounts on the mechanical properties of roller compacted concrete. Different type of fibers and admixtures has been suggested and in this research, cement type II from Sofian cement factory, silica fume from Azna-Lorestan factory, super plasticizer with poly carboxylic base, aggregates from Talmase factory (coarse aggregate with Dmax= 50 mm and fine aggregate with FM= 3.12), filler from Azardash factory, and poly-propylene fibers from Isfahan factory in different sizes of 6 and 12 mm by using in amounts of 0.35, 0.70 and 1.4 kg/m3. Cylindrical samples of 150´300 mm were prepared with above mentioned local materials and cured in fresh water in definite periods days of 3, 7 and 28 days in laboratory temperature and tested according to standards ASTM C39 and ASTM C496 for compressive and tensile strengths of samples. Consideration of test results showed that the Aspect Ratio of fibers is an important factor in strength of samples. Mainly for compressive strength, the best results come out by shorter fibers; and for tensile strength, the best results were with longer fibers. According to the test results, using polypropylene fibers in roller compacted concrete mix, tensile strength was increased almost 20%.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 412

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    53
  • شماره: 

    3
  • صفحات: 

    182-191
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    159
  • دانلود: 

    46
چکیده: 

یکی از مسائل مهم در تولید بتن، تنوع محیطی است که بر بتن و عناصر ساخته شده از این ماده تأثیر می گذارد. با توجه به اهمیت ویژگی های مختلف بتن در شرایط کوتاه مدت و بلندمدت، این مقاله با هدف بررسی تأثیر شرایط دمایی اولیه بتن خود تراکم بر ویژگی های بلندمدت آن و تعیین دمای بهینه اولیه بتن می باشد. برای این منظور، آزمایش های متعددی در سه شرایط دمایی 5، 20 و 40 درجه سانتیگراد برای ارزیابی رئولوژی و خواص مکانیکی بتن تازه در محدوده 7 و 28 روز انجام شد. در این آزمایش ها، از مخلوط های معدنی جایگزین سیمان مانند میکرو سیلیس، خاکستر بادی و زئولیت برای ساخت نمونه های بتنی استفاده شد. نتایج نشان می دهد که خواص مکانیکی نمونه ها با افزایش دمای اولیه در کوتاه مدت افزایش می یابد، در حالی که چنین خواصی در طولانی مدت در مقایسه با نمونه های ساخته شده در دمای اولیه پایین تر کاهش می یابد. علاوه بر این، سیالیت بتن خود تراکم با افزایش دمای اولیه افزایش می یابد.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 159

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 46 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1390
  • دوره: 

    10
  • شماره: 

    56
  • صفحات: 

    52-71
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    1356
  • دانلود: 

    522
چکیده: 

در این مقاله مرور نسبتا جامعی در زمینه ترکیب و خواص مهم بتن های خودتراکم ارائه شده است. بتن خودتراکم برای غلبه بر مشکلات عملیات لرزاندن توسعه داده شد و به علت برخورداری از خواص مناسب، به سرعت گسترش یافت. خمیر و ملات مورد استفاده در بتن خودتراکم باید دارای لزجت و نیز قابلیت تغییر شکل زیاد باشد و با برقراری تعادل بین این دو، ضمن تامین قابلیت تغییر شکل و روانی زیاد، از جداشدگی اجزاء جلوگیری شود. بنابراین استفاده از مواد افزودنی شیمیایی و پودری مختلف، ضروری است. محدود کردن درصد سنگدانه ها به همراه استفاده از مقادیر زیاد پودرهای معدنی و غلظت مناسب فوق روان کننده ها برای دستیابی به این خواص، ضروری است. حجم زیاد پودرهای معدنی که در بتن های خودتراکم استفاده می شوند، می تواند اثرهای متعددی بر خواص آن داشته باشد. پودر سنگ آهک می تواند باعث بالا رفتن گرمای هیدراسیون (آبپوشی) و کاهش قابل ملاحظه دوام بتن در برابر سولفات شود که مربوط به تشکیل ترکیباتی نظیر گچ، اترنجیت و تاماسیت است. همچنین پودرها با توجه به نوعشان می توانند باعث کاهش مقاومت بتن های خودتراکم در برابر آتش، در مقایسه با بتن های معمولی شوند.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 1356

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 522 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
اطلاعات دوره: 
  • سال: 

    1400
  • دوره: 

    52
  • شماره: 

    2
  • صفحات: 

    79-90
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    153
  • دانلود: 

    19
چکیده: 

The aim of this study was to investigate the effect of using portulaca oleracea as a source of plant antioxidants for feeding fattening male lambs, on carcass traits, meat quality, and oxidative stability. Twenty-one male lambs with an average weight of 24±1.5 kg and 150±15 days old were fed with one of the experimental rations included a diet without portulaca oleracea as control, a diet containing 7.5%, and a diet containing 15% portulaca oleracea, for 84 days. The muscle (Longissimus dorsi) samplewas used to determine pH, chemical composition, colorimetric properties, and oxidative stability of meat. Meat lipid oxidation was determined after 1, 7, and 30 days of refrigerated storage using thiobarbituric acid (TBARS). The use of portulaca oleracea in diets improved meat color characteristics such as L, chroma, and Hue. The highest ash concentration and the lowest meat moisture were observed in the treatment of 15% portulaca oleracea (P<0.05). Meat pH was the lowest in the first hour after slaughter but did not differ at 24 h. Compared to the control, in both treatment groups feeding the lambs with portulaca significantly reduced the concentration of Malondialdehyde in the meat of the lambs and increased the meat oxidative stability (P<0.05). The results of this experiment showed that feeding portulaca oleracea by improving properties such as color and increasing the meat oxidative stability improves meat quality, which may have lead to an increase in its nutritional value in terms of human health.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 153

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 19 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

Ghoddousi Parviz | Salehi Amir Masoud

اطلاعات دوره: 
  • سال: 

    2021
  • دوره: 

    51
  • شماره: 

    3 (104)
  • صفحات: 

    103-111
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    30
  • دانلود: 

    0
چکیده: 

1. Introduction The mix design of SCC may be achieved the better requirements of workability by using a targeted variation in mix proportion (Shi and Caijun, 2015). However, these changes lead to problems such as change in the robustness of SCC (Kwan and Ng, 2008). In other words, in order to the complete optimization of SCC mix proportion, the robustness of SCC must be considered in addition to the workability restrictions. Hence, the main objective of this study is the evaluation of the SCCs robustness self-consolidating concretes...

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 30

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1403
  • دوره: 

    40
  • شماره: 

    1
  • صفحات: 

    33-41
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    7
  • دانلود: 

    0
چکیده: 

استفاده از الیاف اغلب با هدف افزایش شکل پذیری و ظرفیت باربری بتن مورد نظر است. در این مقاله 15 طرح اختلاط بتن برای انجام آزمایش مقاومت فشاری و خمشی ساخته شد. 3 طرح اختلاط به عنوان مرجع با 3 نسبت آب به سیمان (24/0، 29/0، 34/0) بدون الیاف و با الیاف با 3 طول مختلف الیاف پلی پروپیلن میلی مترساخته شد. یک طرح با الیاف فلزی و طرح دیگری با ترکیب الیاف فلزی و پلی پروپیلن مورد بررسی قرار گرفتند. بالاترین مقاومت فشاری مربوط به نمونه های دارای الیاف ترکیبی بود که 12/9 درصد نسبت به نمونه مرجع افزایش داشت. نمونه دارای الیاف فلزی بالاترین مقاومت خمشی را داشته و نسبت به نمونه بدون الیاف 60 درصد افزایش مقاومت را نشان می دهد. با افزایش طول الیاف پلی−پروپیلن کارایی و مقاومت فشاری بتن کاهش یافت اما شکل پذیری نمونه های بتنی افزایش داشت و مقاومت خمشی و شکل پذیری نمونه ها افزایش یافت.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 7

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
اطلاعات دوره: 
  • سال: 

    1403
  • دوره: 

    11
  • شماره: 

    2
  • صفحات: 

    104-124
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    13
  • دانلود: 

    0
چکیده: 

در اﻳﺮان گسترش شهرنشینی و رﺷﺪ روز اﻓﺰون ﺳﺎﺧﺖ و ﺳﺎز ﺳﺎﺧﺘﻤﺎن باعث استخراج بی رویه از معادن سنگ طبیعی برای تولید بتن شده است. از سوی دیگر بازسازی یا تخریب بناهای ﻓﺮﺳﻮده منجر به تولید انبوه ضایعات و پسماندهای ساختمانی بخصوص در کلانشهرها می شود. متاسفانه حجم عمده ای از این ضایعات ساختمانی بعنوان زباله به محیط اطراف شهرها منتقل شده و دپو یا دفن می گردند. این دو عامل سبب گردیده تا پایداری محیط زیست با خطری جدی مواجه شود. اﺳﺘﻔﺎده از مصالح قابل بازیافت و اﺳﺘﻔﺎده ﻣﺠﺪد آن ها در ساخت مصالح جدید ﻣﻨﺎﻓﻊ ﺑﺴﻴﺎری ﺑﻪ دﻧﺒﺎل دارد ﻛﻪ ﺻﺮﻓﻪﺟﻮﻳﻲ اﻗﺘﺼﺎدی، کاهش حجم پسماند و حفظ منابع طبیعی مانند معادن سنگ بخشی از آن است. در این تحقیق با هدف بازیافت و استفاده مجدد از پسماند ساختمانی، از ضایعات سرامیکی در نسبت های مختلف حجمی 25%، 50%، 75% و 100% به جای شن طبیعی در بتن خودتراکم استفاده شد. همچنین جهت افزایش کیفیت رئولوژی و قوام بتن خودتراکم از پودر زئولیت به جای پودر سنگ استفاده گردیده. آزمایش ها انجام شده شامل جریان اسلامپ، قیف V، جعبه L، مقاومت فشاری در سنین مختلف، مقاومت کششی، جذب آب بتن سخت شده، دوام بتن در برابر چرخه یخبندان و بررسی ریزساختار شکست بتن می باشد. نتایج این تحقیق نشان داد که افزودن حداکثر 25% ضایعات سرامیک در بتن، کمتر از 10% مقاومت فشاری 28 روزه را کاهش می دهد. همچنین میزان کاهش وزن و مقاومت این طرح پس از قرارگیری در معرض 300 چرخه ذوب و یخبندان به ترتیب 2/3 % و 9/5 % اندازه گیری شد.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 13

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

اطلاعات دوره: 
  • سال: 

    0
  • دوره: 

    3
  • شماره: 

    1
  • صفحات: 

    62-69
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    127
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 127

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

Ghazi Nader Dina | Aghayari Reza

اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    53
  • شماره: 

    2
  • صفحات: 

    168-178
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    105
  • دانلود: 

    18
چکیده: 

Plastic hinge properties play a crucial role in predicting the nonlinear response of structural elements. The plastic hinge region of reinforced concrete normal beams has been previously studied experimentally and analytically. The main objective of this research is to evaluate the behavior of the plastic hinge region of reinforced concrete deep beams and its comparison with normal beams through finite element simulation. To do so, ten beams contain six deep beams, and four normal beams, under concentrated and uniformly distributed loading, are investigated. Lengths in the plastic hinge region involving curvature localization, rebar yielding, and concrete crushing zones are studied. The results indicate that the curvature localization zone is not suitable for the prediction of plastic hinge length in reinforced concrete deep beams. Based on the results it can be stated that in simply supported normal beams the concrete crushing zone is focused on the middle span, but in simply supported deep beams by creating a compression strut between loading place and support, the concrete crushing zone spreads along the compression trajectory. The rebar yielding zone of simply supported beams increases as the loading type is changed from the concentrated load at the middle to the uniformly distributed load.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 105

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 18 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نشریه: 

حکمت صدرایی

اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    11
  • شماره: 

    1
  • صفحات: 

    145-162
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    43
  • دانلود: 

    8
چکیده: 

نحوه ترکیب ماده و صورت از مسائلی است که مورد اختلاف فلاسفه است. مشهور فلاسفه پیشین قائل به ترکیب انضمامی هستند. در این میان، سیدسند قائل به ترکیب اتحادی ماده و صورت شد و ملاصدرا نیز همین نظر را اختیار کرد. مباحث وی به جهت محتوا و عبارات بسیار شبیه به مباحث سیدسند است، لذا این نظریه قوت می یابد که ملاصدرا در پذیرفتن این نظریه مقلد صرف بوده است و هیچ نحو ابداعی نداشته است، اما نکته شایان توجه این است که با این حجم از تشابه در اصل نظریه، دلایل اثبات و پاسخ به شبهات، ملاصدرا نظریه خویش را غیر از نظریه سیدسند معرفی می کند. پس از بررسی نظریه و مبانی هر یک از دو فیلسوف موردنظر، این نتیجه به دست می آید که  صحت ترکیب اتحادی ماده و صورت بر اصولی چون اصالت وجود، تشکیک وجود و حرکت جوهری مبتنی است. صرف نظر از اصالت وجود که در مورد اعتقاد سیدسند به آن، اختلاف نظر است، سیدسند به تشکیک وجود و حرکت جوهری قائل نیست و بنابراین می­توان گفت: ملاصدرا با مبانی خویش تفسیر بدیعی از نظریه ترکیب اتحادی ماده و صورت ارائه داده است.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 43

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 8 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
litScript
telegram sharing button
whatsapp sharing button
linkedin sharing button
twitter sharing button
email sharing button
email sharing button
email sharing button
sharethis sharing button